Toilet Repair, Faucet & Shower Repair Service

Toilet repair covers the common fixes that stop a running, leaking, or clogged toilet, along with dripping faucets and shower problems. LocalPlumber.us connects homeowners across the USA with vetted, insured local plumbers for toilet, faucet, and shower repair, available 24/7. Call now, give your ZIP when prompted, and stay on the line — when someone answers, describe what the fixture is doing and ask for a written price before any work starts.

A fixture that runs, drips, or clogs rarely fixes itself, and a small leak left alone can quietly damage the floor or cabinet underneath. Most of these repairs are quick once the right part is identified.

Signs Your Toilet, Faucet, or Shower Needs Repair

  • The toilet runs, hisses, or refills on its own between flushes
  • Water pools around the base of the toilet or the toilet rocks on the floor
  • The bowl fills slowly, flushes weakly, or clogs again and again
  • A faucet drips from the spout or leaks around the handle
  • Water sprays sideways from the showerhead or the flow is weak
  • The shower will not hold a steady temperature
  • Handles are stiff, loose, or no longer shut the water off fully

A Simple Check You Can Do First

For a running toilet, lift the tank lid and add a few drops of food coloring to the tank water without flushing. If color shows up in the bowl after ten or fifteen minutes, the flapper is leaking. For a dripping faucet, close the small shut-off valve under the sink; if the drip stops there, the fixture is the cause. These checks do not fix anything, but they tell a plumber where to start.

Common Repairs by Fixture

FixtureTypical problemUsual fix
ToiletRuns, leaks at the base, weak flushNew flapper, fill valve, or wax ring; clearing the trap
ToiletRepeated clogsAuger the line, check the vent, or replace the toilet
FaucetDrips from spout or handleNew cartridge, washer, or O-ring
ShowerWeak flow or sprayClean or replace the showerhead
ShowerHot and cold swingsNew mixing valve or cartridge

What a Repair Visit Usually Includes

  • A short conversation about what the fixture is doing and since when
  • Checking the shut-off valve, supply line, and the failing part
  • Replacing or cleaning the worn part, then testing for leaks
  • A plain explanation of what failed and whether other parts are close behind
  • A written estimate first, with the option to say no

What Can Go Wrong

  • A stuck or corroded shut-off valve: older valves can fail when turned, which may add a valve replacement to the job.
  • Rot under the fixture: a long-running leak can soften the subfloor, which then needs repair as well.
  • Discontinued parts: older faucets and showers sometimes use parts that are hard to find, so a replacement fixture may make more sense.
  • The clog is not in the toilet: if other drains are slow too, the blockage may be further down the line. See drain cleaning.

What Affects the Cost

Cost varies from job to job, and the plumber confirms the price for your specific job before work begins. The type of fixture, the parts needed, how easy it is to reach the valves, and after-hours timing all play a part. Ask for a written estimate and what it includes before you agree to anything.

Safety First

If a toilet or supply line is leaking and you cannot stop it, close the shut-off valve behind the toilet or under the sink, or the main shut-off for the house. If water is near outlets or light fixtures, stay away and switch the power off at the breaker only if you can do so safely.

What Happens When You Call

Call now and give your ZIP code when prompted, then stay on the line — it may ring for a moment and the call may be recorded. When someone answers, describe the problem, get a written price and a time window, and book it; nothing is scheduled until you agree. See the full process and how plumbers get into the network →

Who This Is For — and Who It Isn't

A good fit: homeowners and landlords with a running, leaking, or clogged toilet, a dripping faucet, or a shower with weak flow or unstable temperature.

Not the right fit: a full bathroom remodel, new construction rough-in, or a commercial building that needs a dedicated commercial contractor.

Frequently Asked Questions — Toilet Repair, Faucet

Why does my toilet keep running?

A toilet that keeps running is usually caused by a worn flapper, a fill valve that no longer shuts off, or a float set too high. Water slips from the tank into the bowl, and the fill valve keeps topping it up. These parts are inexpensive to replace and wear out over time.

Why is my faucet dripping even when it is turned off?

A steady drip usually means a worn washer, O-ring, or cartridge inside the faucet, or mineral buildup on the valve seat. Because water keeps passing through a part that no longer seals, the drip wastes water around the clock. Replacing the worn part normally stops it.

How do I fix a clogged toilet?

Start with a flange plunger and steady pressure for several pushes. If the water will not drain, a toilet auger can reach deeper. Avoid chemical drain cleaners in a toilet. If the bowl keeps backing up or other drains gurgle too, the clog may be in the main line, and a plumber should look.

How much does toilet, faucet, or shower repair cost?

Cost varies from job to job, and the plumber confirms the price for your specific job before work begins. The fixture, the parts needed, whether a valve behind the wall is involved, and the time of the visit all play a part. Ask for a written estimate that lists parts and labor.

When should I replace a toilet instead of repairing it?

Replacement is worth considering when the porcelain is cracked, the toilet clogs repeatedly, it rocks on the floor, or repairs keep recurring. A toilet that uses much more water than newer models may also be worth swapping. A plumber can compare repair and replacement and explain the trade-offs for your bathroom.

Why is my shower water pressure weak or the temperature unstable?

Weak flow is often a clogged showerhead from mineral scale, which a soak or replacement can fix. Temperature swings usually point to a worn mixing valve or cartridge. If pressure is low at every fixture, not just the shower, the cause may be elsewhere in the supply line, and a plumber can trace it.

Can a leaking toilet or faucet damage my home?

Yes. A slow leak at the base of a toilet or under a sink can soak the subfloor and cabinet for weeks before it shows, causing rot and mold. Even a small constant drip adds to the water bill. Shut off the fixture supply valve and book a repair as soon as you notice moisture.

More Plumbing Help

Leak Detection · Drain Cleaning · Emergency Plumbing · Water Heater Repair · Low Water Pressure Repair · Sump Pump Services · Residential Plumbing Services · See all plumbing services · Browse every area we cover