Plumber in High Point, NC
LocalPlumber.us connects High Point homeowners, landlords and property managers with vetted, insured local plumbers, available 24 hours a day, from Downtown High Point to the neighborhoods toward Oak Hollow Lake.
High Point plumbing is shaped by Oak Hollow Lake and Arnold Koonce City Lake water, furniture-market history and mill-era homes. Call now, give your ZIP code when prompted, and describe the problem when someone answers.
If you need a plumber in High Point, NC, you are in the furniture capital, where the city draws water from Oak Hollow Lake and Arnold Koonce City Lake and treats it at its own Ward plant. Below are the most common problems, why they happen and what to try first.
High Point Plumbing Problems and First Steps
| What You Notice | Common Cause Here | What to Do First |
|---|---|---|
| Green or blue stains around fixtures | Copper corrosion or a dripping joint | Wipe the area, watch for growth and book an inspection (Residential Plumbing Services) |
| Sewer smell outdoors | A cracked lateral or a loose cleanout cap | Check the cap and book a camera check |
| Hot water that fades mid-shower | Sediment or a failing element | Check the thermostat and book a tank check |
| Sound of running water in a quiet house | A hidden leak or a stuck fill valve | Check fixtures, then the meter, and call (Emergency Plumbing) |
| Water pooling around the shower base | Hair in the trap or a slow drain | Remove the cover, clear what you can and book a cleaning (Drain Cleaning) |
| Low water pressure | A failing regulator or a hidden leak | Compare several taps and call |
City Lakes and the Ward Plant
High Point does not use Greensboro’s reservoirs. Check your bill for your provider and its notices. The service line past the meter and the plumbing inside are the owner’s.
Furniture Showroom Buildings and Mill Homes
The showroom district and old mill villages mix large commercial plumbing with small worker houses from the early and middle twentieth century that still have galvanized supply, cast iron drains and clay laterals.
Market Season Rentals
Short-term rentals fill during the furniture market. Test shutoffs, toilets and heaters between guests and keep a record of repairs.
Homes From the 1960s to the 1990s
Original water heaters, shutoffs and supply stops are often past their expected life, and some homes from the late 1970s to the mid-1990s have polybutylene lines.
Preparing Plumbing for Winter Weather
A winter plan costs little compared with a flooded floor and ruined drywall. Open cabinet doors on exterior walls and let a faucet drip when the forecast drops below the mid-twenties. Photograph the shutoffs and keep the photo with your insurance records.
Corrosive Water and Old Copper
Sediment and rust settle at the bottom of tank heaters and shorten their life. Replace failing sections of pipe before a pinhole leak damages drywall and flooring. Water heater repair is available if the tank is already failing.
Slab and Wall Leaks
A leak under the floor can run for weeks before anything shows. A hissing sound at night, damp baseboards or lifted flooring are other clues. Pinpointing the leak first avoids guesswork and extra demolition. Emergency plumbing help is available.
Sewer Lines and Tree Roots
Know where your cleanout is so a plumber can reach the line quickly. The camera shows what is inside the pipe and how far the problem runs. Drain cleaning covers most blockages, while sewer line repair is for confirmed damage.
To go deeper, read how much a plumber costs and signs your home needs repiping.
Quick Checks Before You Call a Plumber in High Point
Look for the signs of a hidden leak behind a wall: a stain that grows, a bubbled paint patch, a musty smell, a warm spot on the floor or the faint sound of water at night. Read the meter, and if it moves, close the main. A plumber can use acoustic and thermal tools to find the leak without opening large sections of drywall, which keeps repair costs and mess down.
Flush the water heater once a year if it is a tank model. Turn off power or gas, connect a hose to the drain valve and run the water until it clears. On an old tank that has never been flushed, ask a plumber first, since moving old sediment can expose leaks. Regular flushing slows scale buildup and keeps the burner or elements working efficiently for longer.
Test every shutoff valve under sinks and behind toilets once a year by closing and opening it gently. Valves that have not moved in years can seize or leak when turned, so replace any that drip or refuse to close while the plumber is already on site. A set of working stops lets you isolate one fixture instead of shutting off the entire house when something fails in High Point.
Make sure dishwasher drains have a high loop or an air gap. Without one, dirty sink water can flow back into the dishwasher, and the unit may drain slowly. Check the hose for kinks and clean the air gap cap if there is one. If the sink backs up when the dishwasher runs, mention it, because the garbage disposal knockout plug may also be left in place.
When to Call Right Now — and When It Can Wait
Who This Is For — and Who It Isn’t
High Point Service Area and Map
Coverage spans High Point and the surrounding Guilford and Randolph County area, including Downtown and the Oak Hollow area and the communities toward Greensboro, Jamestown and Archdale. For the cities we cover around High Point, see the Piedmont Triad page, or browse the North Carolina plumbers hub and the full locations directory.
Frequently Asked Questions — Plumbing in High Point, NC
What is the first call to make for a flooded house in High Point, NC?
Shut off the main water valve, then call the number on this page and enter your ZIP code. Stay on the line, describe the situation and ask for the company name and arrival window. Our emergency plumbing guide covers how to limit damage.
Who do I call for the High Point water department versus a plumber?
Call the High Point water department about the street main, the meter, outages and service requests. The line from the meter to the house, the shutoffs, the heater and every fixture belong to the owner, so call a plumber for those. If the meter keeps moving with every tap off, the leak is on your side.
Where does High Point’s water come from?
Oak Hollow Lake and Arnold Koonce City Lake, treated at the city’s Ward plant. It is separate from Greensboro’s system.
Do older High Point homes in mill villages have galvanized or cast iron pipe?
Many homes from the early and middle twentieth century do. Galvanized supply clogs from the inside and cast iron drains rust through. A written inspection with a camera run shows what remains.
Could my High Point home have polybutylene pipe?
Polybutylene was common in North Carolina homes built from roughly the late 1970s to the mid-1990s. It is usually gray or blue plastic near the heater or main. If you see it, ask a plumber about replacing it.
Is High Point water hard, and what does it do to my pipes?
Soft, slightly acidic water is typical of north and central North Carolina supplies. Scale is rarely the issue; pitted copper and pinhole leaks are. Your utility’s water quality report lists the numbers.
How do I protect High Point pipes in a cold snap?
Pipes in attics, crawlspaces and outside walls are the ones that burst. Insulate them, let a tap drip on the coldest nights and keep the main shutoff easy to reach.